| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Handheld |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiberglass construction, threaded brass connectors.
Connect individual section end-to-end to create a variety of length.
Packaged with a solid carrier tube, convenient for carrying and holding if you choose tracking option.
For access to wires and cables under floorboards, above ceiling, trunking and wall cavities.
Threaded connectors are bevelled on both ends to prevent snagging and hang ups on obstructions.
| Purpose of Perforation | Applicable Diameter | Notes |
Electrical/Network Cables |
5-8mm |
For pulling electrical and network cables through building conduits and walls |
| Street Light Poles |
8mm | For pulling electrical cables |
Optical Cables |
Within 200m:10-12mm |
When connecting, wrap the optical cable with rope or wire at the pulling head of the pipe threading machine. On the other side, pull back while rotating the cable reel to wind the threading machine back onto the frame until the entire optical cable passes through the conduit |
| Over 200m :14mm | ||
| Seven-Hole Plum Blossom Tube ,Five-Hole Plum Blossom Tube | 11-12mm | For conduit lengths of 100-200m |
| 110 Corrugated Tube | 12mm | For conduit lengths of 100-150m |
| Conduits over 100 | 13mm | Approximately 180m |
| Communication Conduits Over 100 | 14mm | Approximately 200m |
| Power Conduits over 200 | 16mm | When pulling power cables, always use a pipe threading machine to first pull a tension rope or steel wire through the conduit, then use the steel wire to pull the cable |
| Length Selection: Must be approximately 20m longer than the conduit | ||
){kind=link}