| Customization: | Available |
|---|---|
| Type: | Handheld |
| Feature: | Fire / Flame Retardant |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Note :
Fiberglass wire pullers are characterized by a hard and brittle material property. Therefore, during use, you should ensure that the bending diameter does not fall below 60 centimeters. In pipelines or other construction environments, when encountering right-angle bends or angles less than 90 degrees, special care must be taken to protect the pulling head from breaking. When pulling out of the shaft, appropriate measures should be taken to prevent damage to the wire puller (such as using pulleys at corners for coordinated operation, etc.).
Setup:
Extend the rod from the guide wheel and connect it to the appropriate metal head before threading it into the pipeline.
For Cleaning:
The guide head can be attached to cleaning tools to clear blockages in pipes.
For Cable Installation:
First, use the wire puller to guide a steel wire or iron line through the pipe, then use it to pull the cable into place.
Protect the Pulling Head:
Always align the pulling head with the movable pulley on the cart frame before threading.
When fully retracting the wire puller, be cautious-the last section is secured in a ring on the cart frame (used to fix the pulling head during coiling). Pull gently to avoid breakage.
Temperature Limits:
The fiberglass wire puller can withstand temperatures between -40°C to +80°C.
Avoid exposure to extreme heat or cold during use.
Store in a cool, dry place after use; avoid prolonged sunlight or rain exposure.
Maximum Tension & Bending:
Maximum straight-line pulling force: 2.5 tons.
Never use high-power machinery to pull at 90° angles, as this may cause snapping.
For Large Cable Projects:
Do not pull cables directly with the wire puller. Instead:
Use the metal pulling head to guide a steel rope through the pipe.
Then, use the steel rope to pull the cable.
Recommended: Use guide pulleys to improve efficiency and extend the wire puller's lifespan.
){kind=link}