| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Setup:
Extend the rod from the guide wheel and connect it to the appropriate metal head before threading it into the pipeline.
For Cleaning:
The guide head can be attached to cleaning tools to clear blockages in pipes.
For Cable Installation:
First, use the wire puller to guide a steel wire or iron line through the pipe, then use it to pull the cable into place.
Protect the Pulling Head:
Always align the pulling head with the movable pulley on the cart frame before threading.
When fully retracting the wire puller, be cautious-the last section is secured in a ring on the cart frame (used to fix the pulling head during coiling). Pull gently to avoid breakage.
Temperature Limits:
The fiberglass wire puller can withstand temperatures between -40°C to +80°C.
Avoid exposure to extreme heat or cold during use.
Store in a cool, dry place after use; avoid prolonged sunlight or rain exposure.
Maximum Tension & Bending:
Maximum straight-line pulling force: 2.5 tons.
Never use high-power machinery to pull at 90° angles, as this may cause snapping.
For Large Cable Projects:
Do not pull cables directly with the wire puller. Instead:
Use the metal pulling head to guide a steel rope through the pipe.
Then, use the steel rope to pull the cable.
Recommended: Use guide pulleys to improve efficiency and extend the wire puller's lifespan.
| Purpose of Perforation | Applicable Diameter | Notes |
Electrical/Network Cables |
5-8mm |
For pulling electrical and network cables through building conduits and walls |
| Street Light Poles |
8mm | For pulling electrical cables |
Optical Cables |
Within 200m:10-12mm |
When connecting, wrap the optical cable with rope or wire at the pulling head of the pipe threading machine. On the other side, pull back while rotating the cable reel to wind the threading machine back onto the frame until the entire optical cable passes through the conduit |
| Over 200m :14mm | ||
| Seven-Hole Plum Blossom Tube ,Five-Hole Plum Blossom Tube | 11-12mm | For conduit lengths of 100-200m |
| 110 Corrugated Tube | 12mm | For conduit lengths of 100-150m |
| Conduits over 100 | 13mm | Approximately 180m |
| Communication Conduits Over 100 | 14mm | Approximately 200m |
| Power Conduits over 200 | 16mm | When pulling power cables, always use a pipe threading machine to first pull a tension rope or steel wire through the conduit, then use the steel wire to pull the cable |
| Length Selection: Must be approximately 20m longer than the conduit | ||
){kind=link}